APFC Panel
A smart approach towards reducing electricity bill charges along with eliminating Power Factor penalty is to go in for APFC (Automatic Power Factor Correction) panel. Lower Power Factor is caused mainly by inductive loads (such as induction motors) which require reactive (kVAr) power to produce magnetic fields Primarily consisting of capacitor banks and contactors for addition / removal of the required KVAr to system so as to improve Power Factor, is what APFC panels do. An APFC relay automatically switched the capacitor banks ON or OFF based on the actual working load, thereby providing required KVAr and maintaining the power factor close to unity. We here at OHM Electro System offer you modular as well as non-compartmental construction of APFC panels. We can also provide reactors for protecting the capacitors from the harmful effect of harmonics, if necessary.
Read more
Technical Data
Phase | Three Phase |
Frequency | 50 Hz |
ConstructionType | Modular & Fixed Type |
Materia | Sheet Metal |
Rated Current | Upto 6300 Amps |
Operational Voltage | 110V/230V/415V AC |
Rated Insulation | 1000 V |
Rated Service Voltage | 690V AC |
Short Time Current | 50 KA for 1 sec., 105KA Peak |
Ambient Temperature | 45 ℃ |
Degree of Protection | IP42, 54, 55, 65 as per Custom Requirement |
Form of Separation | Upto 3B/4B (Optional Type 5) |
Type Tested for | Short Time Current withstand Temperature Rise Degree of Protection |
Bus Bar | Aluminium or Copper |
Ref. Standard | IEC60439-1&2, IS:8623 |
Feeder Configuration | Drawout or Fixed, Extendable Type |
Features
Application
Dairy Industry
Plastic industry
Refrigeration Plants
Chemical Plants
Food Processing
Customization
Operational Voltage
We can customize the panel by required operational Voltage.
Ampere Capacity
We can customize the panel by required Ampere Capacity.
Degree of Protection
We can customize the panel by required Degree of Protection.
Frequency
We can customize the panel by required Frequency.
Related Products